Get Into An Old Safe With Safecracking

Get Into An Old Safe With Safecracking

If you own an old safe, you may be wondering how to get into it. There are several different ways to do this, and some methods work better than others depending on the type of safe your family has in its possession. 

In this blog post, we’ll discuss some of the techniques that have worked well almost for most locks. If you own an old safe and want to know how to crack it open without damaging anything, read on!

It’s better to consult the expert safecracker Melbourne if you are unable to open the safe rather than damaging it further!

Do some research on the company that made it.

The first thing you need to do when trying to get into an old safe is to find out as much information about it as possible. The safest route here is to research the manufacturer so that you can look up the model number and a serial number of your safe and then determine what type of safe you are dealing with.

The model number will tell you how many tumblers there are in the lock—the more tumblers, the harder it is for someone without knowledge of how safes work to open them using brute force methods like drilling holes or using explosives. 


Safecracker Melbourne


If a safe has just one tumbler (or none), it’s probably pretty easy to get into; if there are three or four, though, then expect some difficulty getting inside!

The serial number allows us to check if our old box is made by any manufacturers who still offer support service today—if they do not offer support anymore then this may mean that they won’t be able to help us bypass any security features built into its original design either!

Look for clues in the room where the safe is kept.

  • Look at the safe’s exterior: Does it have any identifying marks? If so, what are they? A combination of letters and numbers on a dial might indicate that you need to set your combination to those same letters and numbers.
  • Look at the room for any identifying marks: If there is one, does it correspond with anything on or around your safe? 
  • This can be tricky because most safes are made from steel, which doesn’t conduct electricity well but will still show up as an imprint if you use a magnetizing tool like this one (it uses electromagnetic induction). 
  • You can also use an electromagnet, but these tend to be expensive and may damage electronic components inside your safe if you get too close to them.

Know what type of safe you’re dealing with.

If you don’t know how to open a safe, you might as well give up now. Safecracking is all about knowing your stuff. Before you get started on opening that old safe in your attic, familiarize yourself with the different types of safes and their security features. 

Take note of whether it’s a combination lock or key-based lock (you’ll need to learn how they work). You should also be familiar with drilling holes into the side of the safe so that you can use tools like blowtorches or crowbars within the confines of its walls.

If you have time, practice these skills before attempting anything else!


If you’re looking to get into an old safe, make sure it’s worth the time, effort, and money. With some research on the company that made it, as well as its history in your area, you’ll be able to know more about what type of safe you’re dealing with. 

In the end, it’s always better to rely on professional safecracker Melbourne to get things done right.

Yellow Blog